风云论坛

标题: 关于FX slug-A管子及专用的蛋蛋 [打印本页]

作者: 匿名    时间: 2019-10-25 13:55
标题: 关于FX slug-A管子及专用的蛋蛋
油管上看了好几天、但是本人不会英语所以基本没看懂!麻烦老司机解答一下!没玩过或者不懂英语没看懂的不要发言了!

作者: 匿名    时间: 2019-10-25 14:28
说的对,大伙都不要发言了
作者: 阿杜回来了    时间: 2019-10-25 14:55
Summary and translation 1. Slug (bullet egg) has a history of 100 years and is used in firearms with relatively mature performance. Pellet is about 20 years old. 2. Slug has always been used on gas, but it is mostly used on high-power dogs with poor accuracy. Matt wants to use it on standard dogs this time. 3. Matt was fully involved in the development of this tube since the beginning of 17 years, and the reason was that he wanted to use it for long-range shooting. The reason for choosing fx is that fx can quickly make various tubes for testing and improvement, unlike other manufacturers that order tubes. 4. Over the years, I tested various slug eggs with poor results. Some of them took a 25-yard basin walk and finally used his nsa eggs with the help of Nielsen. 5, the precision of the breakthrough point in the discovery of specific winding distance, special shrinkage process, soft lead. 6. The difference between fx STX pellet liner and slug liner is in the wrapping and shrinking method. It seems that the official website is 109 dollars 7. The slug tube does have a better accuracy of 50 yards than 25 yards, which is a common fault of the slug, as well as on firearms, because the egg is unstable at the exit and stable after a long distance. But matt didn't have that problem. It had to do with debugging the equipment. 8. Slug needs debugging, and there is a sweet point of accuracy, because it is not as self-stable as mushroom eggs and is more affected by outlet airflow. Therefore, it is recommended to adjust the hammer force, must not be too large, resulting in too much waste gas. 9. The diameter of the egg recommended by matt is 0.207 inch, 600mm works for 23gr egg, 700mm works for 26-27gr egg, and the slug egg is suitable for high speed, with no upper limit
作者: 我是你爸爸nbu9    时间: 2019-10-25 15:23
提示: 作者被禁止或删除 内容自动屏蔽
作者: 我是你爸爸nbu9    时间: 2019-10-25 15:24
提示: 作者被禁止或删除 内容自动屏蔽
作者: miaoww    时间: 2019-10-25 17:31
我是你爸爸nbu9 发表于 2019-10-25 15:23
你可以复制了自己翻译

谢谢
作者: 我是你爸爸nbu9    时间: 2019-10-25 17:39
提示: 作者被禁止或删除 内容自动屏蔽
作者: 我是你爸爸nbu9    时间: 2019-10-25 17:43
提示: 作者被禁止或删除 内容自动屏蔽
作者: heixixi    时间: 2019-10-25 22:05
特定的缠距,特殊的缩口工艺,软铅
6.FX STX pellet liner和 slug liner 之间的区别是包装和缩口工艺,貌似官网上是个109美刀。
7.这个叫slug 的线管和这种用这种管的狗都有个毛病就是50码比25码更鸡巴准,因为蛋在出口不稳定,得经过很长一截距离才能保持稳定,这得调试你的家伙,但是MATT就没这个毛病。
8.slug 需要调校,有一个不错的提高精度的选择,因为它不能跟像蘑菇蛋那样的自稳蛋蛋比,更受出口气流的影响,因此,建议调整击锤力度,不能太大导致过多的气体。
9.matt推荐600mm的.207用23gr的粮,700MM用26-27gr的粮,slug粮适用于高速蛋
作者: heixixi    时间: 2019-10-25 22:16
妈的我打的字哪去了
作者: heixixi    时间: 2019-10-25 22:20
就是说这个管用了特殊的缠距和缩口工艺,出口不稳定,50码比25码准,官网上109块钱一根,但是受出口气流影响也小,让你击锤劲别太大,适和推高速粮,,600MM的23gr的粮,700用26gr的粮
作者: lzt    时间: 2019-10-26 16:47
y上可以自动翻译成中文字幕,大差不离的也能看看,自己设置一下就行




欢迎光临 风云论坛 (http://www.ylie51.com/) Powered by Discuz! X3